EVO 8-9 MR 6-Speed Performance Trans Build Service Includes:

  • Albins 3rd - 5th Gear Set
  • Synchros 3rd - 6th Gears
  • Synchro Springs: 3rd - 6th Gears
  • Synchro Keys 3rd - 6th Gears (Modified to prevent the springs from breaking)
  • Hub & Sleeve 5th - 6th Gear
  • Input Shaft Oil Seal
  • CV Axle Seal
  • Case Plug
  • Drain Plug Washer
  • Fill Plug Washer

Transmission build service for the 6-Speed EVO 8-9 MR. This rebuild service will fix the most common issues with this gearbox. This gear set is stronger than OEM and is designed for vehicles making more than stock power levels.

This build service includes several key components found on the Input Shaft. Mitsubishi, in their infamous wisdom, has deemed the Intermediate Shaft as non-serviceable and will only sell it as a complete cluster. Meaning, if you have a bad shaft bearing, they require a complete assembly to be purchased. More information on the Intermediate Shaft can be found on our website HERE. </p

Specs

Jacks Transmissions has grown into a company which now services exotic and terribly complex DCT (dual clutch transmissions) used in the GTR, SST, Porsche, Audi, VW, and many more high end vehicles. Due to this exciting change, we have spent a lot of money for the state-of-the-art equipment needed to service these high dollar and expensive units. We have also designed and built many of our own parts for these vehicles.

All machine work, cleaning, and detail work is performed in-house by very talented technicians and engineers. The quality you get from Jacks Transmissions is an unbelievable bargain. We do not know of anyone else who cleans the transmission via a 110gal Ultrasonic and Pulse-Jet unit, or who employs such talented people.

Exceptionally clean units are one of the many reasons why our Transmissions and Transfer Case assemblies are of the highest quality in the business! We have state-of-the-art cleaning equipment which other transmission builders and service shops could only dream of.

With the best cleaning equipment, we also have a very clean facility. All units are built in a spotless environment using tools, and benches, which are clean and only used for assembly purposes. In other words, the same tools used to pull your dirty old transmission out of your car are NOT the same tools used to rebuild your pristine unit afterward. Take a look at the typical shop and check their tools. It is shocking how dirty things are in most shops and that dirt will end up in your unit. That does not happen here.

The quality and experience you get from Jacks Transmissions shows with the overwhelming number of high-end vehicles we service in our shop. Be a part of the rare opportunity to have one of the cleanest and most experienced specialty shops in the World service your transmission!

Our pricing structure was created to assure only the highest quality materials and workmanship. Anyone which beats our price is taking short-cuts which you will pay for in the end. Look into the details of our build services and you will see the additional attention we provide which is unique and cannot be duplicated.

We love the Mitsubishi transmission and have not forgotten that it is these units which got us to where we are today. We will continue to service them as we want to continue to support the community. This is a great opportunity for the Mitsubishi enthusiast to have a build using the same high-end equipment to service the Mitsubishi transmission as we use for the expensive exotic units. This means that the cleanliness and attention to detail is unmatched!

CORE EXCHANGE SERVICE

Please EMAIL us for price and availability. Many of the build services we offer can be performed on an 'exchange' basis. Core charges and core convenience fees are separate from the costs of the build service. In many cases, core fees can be refunded pending the condition of what we receive in exchange. Note: We will retain a 10% convenience for this service.

WPC GEAR TREATMENT

WPC is a permanent surface treatment that reduces friction while strengthening the part. Its unique micro-dimple formation pattern greatly reduces friction and is unmatched by conventional methods of surface treatment. It is a proven process that has been utilized for many years in the racing and automotive industry and is complimented by utilizing our Micropolish treatment. WPC can strengthen parts in two ways. First it adds an extremely high level of compressive stress at, and near, the surface. The second, is that the WPC treatment creates a Nano - Crystalline structure at the surface of the metal. Both of these mean that metal fatigue and crack initiation are both noticeably reduced; thus strengthening the gears and shafts inside of the transmission.

MICROPOLISH

Micropolishing is a gentle polish on the gears that will smooth and remove some stress concentrations uniformly. It also polishes the gears in the area they make contact with other parts, so you have less friction loss which means less heat, better fuel economy, and longer life.

ALBINS EVO 6-SPEED GEAR SET

EVO 8-9 MR owners can now rejoice! No need to worry about swapping over to a 5-speed transmission or breaking the factory gears on your tastefully modified EVO MR 6-speed. This upgraded gear set is much stronger than the factory gears and is a direct drop in replacement for the weak factory gears. These gears have been endurance tested at 500hp and have performed flawlessly.

They are manufactured to ISO 9001 / 2008 quality standards, made of billet high-alloy proprietary grade steel, and utilize CAD engineered custom tooth profiles. The 3rd - 5th gears are Shot Peened, Micropolished, and ISF treated. This has been proven to reduce gear friction, reduce noise and vibration, which in turn improves gear life up to 300%! Gears are profile ground for better tooth contact, less wear, and far less gear noise compared to other aftermarket gear sets.

HEAVILY WORN OR DAMAGED UNITS

Any additional parts needed which are not listed or not part of this build will cost extra to replace. We will email pictures and detailed information if this is the case. We know you do not like surprises, so we try to make this process as painless as possible. If this turns out to be the case, though, please keep in mind that we just want you to have a high quality built assembly. Having your vehicle down is bad enough, so why cut corners and risk it again? Quality is the key here and sometimes it costs more to do this on a specialty or aging platform. Simply put, it is not worth the risk of using a sub-par component if an inspection reveals it is a weak link.

ATTENTION TO DETAIL

All machine work and cleaning is performed in-house. We also spend a lot of time on synchro timing, alignment and operation to give you the best shift possible. Click -> Synchro Blueprinting

SHIPPING

Shipping your Transmission (or complete car) to us is simple! Most assemblies are shipped in a double walled custom made box. Your assembly will be sitting snugly, and safely, in preformed foam pads to assure safe delivery.

In certain situations, though, we may need ship via a freight pallet. Please email or call us if you have shipping questions or for a quote.

Write a review

Please login or register to review

Performance Trans Build Service - EVO 6-Speed

  • $3,499.99


Available Options


Tags: 6-speed, 6speed, evo, evo 9, evo IX, evo mr, evomr, gear box, gearbox, transmission

Contact Us

Whether you need a part to complete your build or want us to do it from the ground up, we've got you covered.
Let us take your project 'from Start to FINISH!'

Find Our Shop

Follow Us

     

3920 North Weber Street Colorado Springs, CO, 80907

Hours: Mon-Fri 8:30AM-7PM MT

CALL US  |  CONTACT US  |  SITEMAP

Quicklinks