Standard Build Service
This rebuild includes several upgrades and replacement parts to your transmission:
- Latest Revision All Bronze Synchros (Forward Gears)
- Torrington Upper Bearing Center Diff Upgrade
- Unbreakable 3-4 Fork (1G Gear Set)
- Double Synchro 2nd Gear
- 4 Spring 1-2 Hub
- Transmission Filter Modification
- Strong Neodymium Magnet
We spend a lot of time on synchro timing, alignment, and operation to give you the best shift possible! Click -> Synchro Blueprinting
This transmission rebuild is recommended for 90-99 AWD DSM’s (Talon, Eclipse, Laser) at near-stock power levels and includes everything in the list below. This build package was designed to fix the most common causes of poor quality shifting, while correcting several key areas to increase reliability.
Additional parts / services may be required, depending on the condition of your transmission.
1-2 fork combined with our efficient double synchro makes for a very strong and reliable assembly. You will never have to worry about a broken 1-2 fork again.
Unbreakable 3-4 Shift Fork Upgrade - 1G
3-4 Shift Fork - 2G
All Bronze Synchronizer Blocker Rings (Excludes early 90 style 5th)
Jacks Trans machined double synchro 2nd gear upgrade, with removed lip, to allow for longer synchro life. Please note that this gear is NOT the same as the double synchro 2nd found in the 2G. Our gear is designed with more room for synchro wear and a more precise fit.
1-2 Synchronizer Hub
1-2 Synchronizer Slider
1-2 Synchronizer Springs (x4)
3-4 Synchronizer Springs (x2)
1-2 Synchronizer Shoes
3-4 Synchronizer Shoes
5th Gear Synchronizer Blocker Ring with Flipped Slider (Excludes early 90 style)
Input, Output, and Axle Seals
1-2, 3-4, and 5-R Roll Pins
Center diff spider gear side shims x2
Upper Torrington upgrade. This is important as the thrust washer included from the factory fails often and can damage many parts in the trans. This eliminates that issue.
Drain Plug / Fill Plug Washers
Neodymium Trash Magnet
We reset bearing preloads to our specs for maximum bearing and gear life.
Parts cleaned using industrial parts washers. Exceptionally clean units is one of the reasons why our transmissions are the highest quality in the business! We have state-of-the-art cleaning equipment which other trans builders could only dream of. More info HERE
With the best cleaning equipment, we also have a very clean facility. All units are built in a spotless environment and using tools, and benches, which are clean and only used for assembly purposes. In other words, the same tools used to pull your dirty old trans out of your car are NOT the same tools used to rebuild your pristine unit afterward. Take a look at the typical shop and check their tools. It is shocking how dirty things are in most shops and that dirt will end up in your unit. That doesn't happen here.
Your unit is also shipped in a double walled custom made box for Jacks Transmissions. Your unit will be sitting snugly, and safely, in preformed foam pads to assure trouble free delivery.
Thanks to the Mitsubishi Community!
Jacks Transmissions has grown into a company which now services exotic and terribly complex DCT (dual clutch transmissions) used in the GT-R, SST, Porsche PDK, Audi, WV, and many more high end vehicles including the Lambo robotic E-gear. Due to this exciting change, we have spent a lot of money for the state-of-the-art equipment needed to service these high dollar and expensive units you find in $100k+ vehicles. We have designed and built many of our own parts for these vehicles.
We love the Mitsubishi trans and have not forgotten that it's these units which got us to where we are today. We will continue to service them as we want to continue to support the community. This is a great opportunity for the Mitsubishi enthusiast to have a build using the same high-end equipment to service the Mitsubishi trans as we use for the expensive exotic units. This means that the cleanliness and attention to detail is unmatched!
All machine work, cleaning and detail work is performed in-house by very talented technicians and engineers. The quality you get from Jacks Trans at the price we have listed is an unbelievable bargain. We do not know of anyone else which cleans the trans via a 110gal ultrasonic and Pulse-Jet unit, or employs such talented and expensive people.
The quality and experience you get from Jacks Trans shows with the overwhelming number of high-end vehicles we now service at the shop. Be a part of the rare opportunity to have one of the cleanest and most experienced shops in the World service your trans!
Our pricing structure was created to assure only the highest quality materials and workmanship. Anyone which beats our price is taking short-cuts which you will pay for in the end. Look into the details of our rebuilds and you will see the additional attention we provide which is unique and can't be duplicated. We would be honored to keep the DSM tradition alive and service your trans!
Thank-you for viewing our site and considering us!