Budget Road Race (EVO8-9)
This trans is very strong, but friendly in that you can race at the track and drive it to work the next day. This trans is assembled with the highest quality materials and workmanship possible to assure a unit which works as intended and will live. It will shift beautifully and operate quietly.
All machine work and modifications to the trans are performed in-house using state-of-the-art equipment and techniques. We do not farm anything out and control every part of the rebuild process here.
The differences between this build and the standard Road Race / Ultimate Final Drive build is this one does NOT replace any gears / shafts / final drive ratios, etc. Have questions regarding gear ratios and final drive ratios? We have created a chart which compares the various gear and final drive ratios: EVO Ratio Comparison
Attention to detail
We also spend a lot of time on synchro timing, alignment and operation to give you the best shift possible. Click -> Synchro Blueprinting
Forged splined output tube option
Want to make your transmission rebuild even stronger? Add one of our custom made forged splined output tubes! More information can be found here: Forged Splined Output Tube. We can add this torque tube to your rebuild for only $250! Please visit the supplied link and select the option from the drop down menu to add the torque tube to your transmission rebuild.
WPC GEAR TREATMENT
WPC is a permanent surface treatment that reduces friction while strengthening the part. Its unique micro-dimple formation pattern greatly reduces friction and is unmatched by conventional methods of surface treatment. It is a proven process that has been utilized for many years in the racing and automotive industry and is complimented by utilizing our REM/ISF treatment. WPC can strengthen parts in two ways. First it adds an extremely high level of compressive stress at, and near, the surface. The second, is that the WPC treatment creates a Nano - Crystalline structure at the surface of the metal. Both of these mean that metal fatigue and crack initiation are both noticeably reduced; thus strengthening the gears and shafts inside of the transmission.
REM ISF MICROPOLISH
REM / ISF is a gentle polish on the gears done by machine that will smooth and remove some stress concentrations uniformly. It also polishes the gears in the area they make contact with other parts, so you have less friction loss which means less heat, better fuel economy, and longer life.
Heavily worn or damaged units
Please note- any additional parts needed which are not listed below and not part of this build will cost extra to replace. We will email with pictures and detailed information if this is the case. We know you do not like surprises, so we try to make this process as painless as possible. If this turns out to be the case, please note that it is due to the fact that we want you to have the highest quality trans possible. Again, quality is the key here and sometimes it costs more to do this in an aging platform. It is not worth the risk of using a sub-par part if inspection reveals it is a weak link.
1st gear triple synchro rings
1st gear synchro spring
2nd gear synchro spring
3rd gear double synchro rings
3rd gear synchro spring
4th gear synchro ring
5th gear synchro ring.
Please Note: These 5th gear synchro rings will grind right out of the box! We detail these synchros so the timing is set up correctly and the synchro works properly.
5th gear synchro spring
Reverse gear double synchro rings
Reverse gear synchro spring
Modified roll pins so they won’t back out for 1-2, 3-4, 5-R
Oil seals (input and output)
Revised set of OEM input shaft bearings
This rebuild also includes a FREE High Temperature Coating!
Clean environment and state-of-the-art cleaning equipment
Parts cleaned using industrial parts washers and Aluma Blast coating. Exceptionally clean units is one of the reasons why our transmissions are the highest quality in the business! We have state-of-the-art cleaning equipment which other trans builders could only dream of. More info HERE
With the best cleaning equipment, we also have a very clean facility. All units are built in a spotless environment and using tools, and benches, which are clean and only used for assembly purposes. In other words, the same tools used to pull your dirty old trans out of your car are NOT the same tools used to rebuild your pristine unit afterward. Take a look at the typical shop and check their tools. It is shocking how dirty things are in most shops and that dirt will end up in your unit. That doesn't happen here.
Your unit is also shipped in a double walled custom made box for Jacks Transmissions. Your unit will be sitting snugly, and safely, in preformed foam pads to assure trouble free delivery.
Core charges will be refunded -- depending on the condition of your core!!
If you do not have a core, we can sell you one of our many cores we have in stock. Please EMAIL us for price and availability.
Thanks to the Mitsubishi Community
Jacks Transmissions has grown into a company which now services exotic and terribly complex DCT (dual clutch transmissions) used in the GT-R, SST, Porsche PDK, Audi, WV, and many more high end vehicles including the Lambo robotic E-gear. Due to this exciting change, we have spent a lot of money for the state-of-the-art equipment needed to service these high dollar and expensive units you find in $100k+ vehicles. We have designed and built many of our own parts for these vehicles.
We love the Mitsubishi trans and have not forgotten that it's these units which got us to where we are today. We will continue to service them as we want to continue to support the community. This is a great opportunity for the Mitsubishi enthusiast to have a build using the same high-end equipment to service the Mitsubishi trans as we use for the expensive exotic units. This means that the cleanliness and attention to detail is unmatched!
All machine work, cleaning and detail work is performed in-house by very talented technicians and engineers. The quality you get from Jacks Trans at the price we have listed is an unbelievable bargain. We do not know of anyone else which cleans the trans via a 110gal ultrasonic and Pulse-Jet unit, or employs such talented and expensive people.
The quality and experience you get from Jacks Trans shows with the overwhelming number of high-end vehicles we now service at the shop. Be a part of the rare opportunity to have one of the cleanest and most experienced shops in the World service your trans!
Our pricing structure was created to assure only the highest quality materials and workmanship. Anyone which beats our price is taking short-cuts which you will pay for in the end. Look into the details of our rebuilds and you will see the additional attention we provide which is unique and can't be duplicated. We would be honored to keep the EVO tradition alive and service your trans!
Thank-you for viewing our site and considering us!