This is a replacement input sleeve / coupler AND output shaft combo for 3000GT VR4 / Stealth TT Getrag transmission and transfer case. If your input sleeve has worn splines, it must be replaced to prevent stripping the splines and the consequential costly failure of the central differential viscous coupling unit.
This combo is for both the 5 Speed and 6 Speed Getrag AWD transmissions.
Installation of this sleeve requires a hydraulic press.
NOTE: For 91-92, 18-spline only; If the transfer case has a bolt in the middle of the cover near the “e” in “Getrag”, then you need a “large bearing” sleeve. If no bolt then “small bearing”.
Please choose 18 Spline (5-Speed), 25 Spline (5-Speed), or 25 Spline (6-Speed) below.
Note, this shaft is not as strong as the shaft from Getrag, but will work well for a mildly modified 3S. If your car is pushing extra power or if it will driven at the track, we highly recommend upgrading the unbreakable 300M shaft!
Tags: 3S Parts