1200 Complete Rebuild Service
This trans is built for drag racing, road racing and daily street use! This service will address TSBs, 1st gear failures, 2-6 gear failures, seal and clutch issues, ETS failures, clutch baskets and retaining clip failures. The unit will operate reliably at 1200hp/1000 torque and shift smooth with our 'Soft Touch' clutch system.
This build includes our highest quality parts. The gear set and clutch system allows this trans to operate smoothly and quietly making it a great option for daily use on the street, yet do everything you need at the track.
We handle everything for this build in-house. Shipping your trans is simple, please contact us for help.
Update - March 2017: Albins is recommending the use of this shaft in conjunction with their full gear sets for all cars over 1000hp. Using an OEM secondary shaft with their 1-6 gear set could potentially introduce intermittent shifting issues on higher powered GTR's. Additional information about this shaft can be found here: Albins Secondary Shaft
- Albins 1st gear and input shaft
- Albins 2-6
- Main Shaft Thrust Plate
- 18-Plate Waffle Design Clutch (9+9)
- Billet 1-Piece Clutch Baskets with extended splines
- Axis Solenoids x2 (high resolution)
- Line Pressure Solenoid
- Lubrication Solenoid
- FWD Output Gear Retaining Clip
- Main Output Gear Retaining Clip
- Albins input shaft gear retaining end nut
- ETS (AWD Unit) completely rebuilt including clutches
- ETS ball retainer
- ETS fluid
- Front input and output seals
- Oil pan gasket
- Pan sump filter
- Paper line filter (better than aftermarket SS)
- Trans clip TSB
- Main valve body cleaned and serviced
- Clutch valve body cleaned and serviced
- 3 high quality auto grade 15lb neodymium magnets
- Rear diff upgraded seals to prevent leaks (includes resealing the cover o-ring)
- Unit torn down completely and cleaned with our state-of-the-art equipment
- Unit assembled in a clean environment
Other options we highly recommend if you have a CBA GT-R:
- Jacks Trans Carbon Clutch Piston Seals 250each (x2)
- Albins Synchro Sleeves $250each (x4)
Options available for both CBA and DBA:
- Albins 'drop gears' Rear Transfer Gears $1100
- Rear diff LSD upgrade $650
- Extended sump kit to prevent oil pressure loss $950
Want to add more power to the front wheels for better traction and 60ft? You will then need these parts below. With our proprietary ETS torque output calibration (using our in-house test station) installing the Albins ETS Output Shaft, the right tires and tune you can achieve consistent 1.3 60ft at the track!
Please email us if you have any questions or would like to change anything offered in this service to fit your needs.